Traffic & Car Park
Effective traffic management protects pedestrians, drivers, and workers on public roads and private sites. Cocus supplies cones, barriers, bollards, signage, and safety mirrors for construction sites, car parks, warehouses, and commercial premises across the UK.
Traffic Cones & Barrier Kits
Traffic cones, barrier tape, safety chains, and complete barrier kits for site demarcation and road safety.
Shop Now
Parking Barriers, Posts & Bollards
Wheel-lock parking barriers, car park bollards, and access control posts for forecourts and private car parks.
Shop Now
Traffic Signs & Mirrors
Road safety signs, parking notices, convex safety mirrors, and site entrance signs for roads and private land.
Shop NowRegulatory Requirements
- Traffic management on UK public roads must comply with Traffic Signs Regulations and General Directions 2016 (TSRGD) and Chapter 8 of the Traffic Signs Manual.
- On private land, workplace transport safety is governed by HSE guidance under the Workplace (Health, Safety and Welfare) Regulations 1992.
- Convex safety mirrors may be required where blind spots create a collision risk under the Health and Safety (Safety Signs and Signals) Regulations 1996.
Traffic management for construction sites and roadworks
Construction sites require clearly defined access and egress routes, separation of pedestrian and vehicle traffic, and appropriate signage at site entrances. For works affecting a public road, a highways-authority-approved traffic management plan is required and Chapter 8 specification equipment must be used. For on-site control, standard cones and barrier tape are generally sufficient. Browse Traffic Cones & Barrier Kits for a full range of site-compliant options.
Car park safety, access control, and space management
Private car parks require clear line-of-sight management, reserved bay enforcement, and safe pedestrian routes. Wheel-lock parking barriers prevent unauthorised use of reserved bays without requiring wardens. Bollards protect vulnerable perimeter areas from accidental vehicle impact. Convex safety mirrors eliminate blind spots at exits. See our Parking Barriers, Posts & Bollards for access control products.
Convex safety mirrors for warehouses and blind spots
In busy warehouses and distribution centres, forklift trucks create significant collision risks at aisle ends, corners, and internal junctions. Full dome convex mirrors provide 360-degree visibility at key risk points. Quarter dome and half dome mirrors suit wall-mounted corner and T-junction positions. Our Traffic Signs & Mirrors collection includes indoor and outdoor rated options in multiple sizes.
Frequently Asked Questions
What size traffic cones are required for motorway roadworks?
Motorway and dual carriageway roadworks in the UK require 750mm cones as a minimum under Chapter 8 of the Traffic Signs Manual. For roads with speed limits of 50mph or below, 500mm cones are typically used. All cones on public roads must be TSRGD 2016 compliant.
Do I need planning permission to install parking barriers?
In most cases, no. Removable parking barriers and bollards on private land do not typically require planning permission. Fixed bollards set into concrete may require a building warrant in some circumstances — check with your local authority.
What type of safety mirror do I need for a warehouse?
For aisle ends and T-junctions, a quarter dome or half dome mirror mounted at ceiling level provides good aisle coverage. For outdoor vehicle exits, a full dome mirror with UV-stabilised housing is recommended. Size to the viewing distance — typically 600mm diameter for distances up to 8m.
Are barrier tape and cones sufficient for site pedestrian segregation?
For low-risk temporary works on private land, barrier tape and cones are generally acceptable. For higher-risk environments or works adjacent to live traffic, HSE guidance recommends more robust segregation such as pedestrian barrier fencing. Always carry out a site-specific risk assessment first.